January 1, 2025, is the date for mobile phones and other small electronic devices. Saudi Arabia announced a law to standardize charging ports for all...
Exactly! Most electronics are surprisingly low-powered, but USB-C can currently support 100W with a draft spec with upwards of 240W. We’ll be fine for awhile.
Yeah, USB-C is fine for even mid-grade laptops. Realistically, if your device is using more than 100W then it probably has an IEC plug (or at least, an in-line power brick with an IEC port) instead. Pretty much the only thing USB-C isn’t suitable for currently is gaming laptops, because those easily draw upwards of 200W.
I’d be surprised if USB-C was a limitation on phone technology even by 2040. The bandwidth and power delivery capacity are way beyond what are needed now. Data transfers from phones are going to increasingly move to wireless in that time frame too, I expect.
The limitation on the viability of USB-C with phones won’t be the actual technological viability of the standard with respect to phones. Instead, the problem for USB-C for phones will be if another standard comes out and starts being used by other devices that do need higher bandwidth or power delivery capability. Monitors, storage devices, laptops (etc.) will eventually need more than USB-C can provide, even with future updates to its capacity. When those switch over to something new, that will be when phones (and other devices) will need to consider a new standard too.
Usb 1.1 came out in like 1994, I still use it for keyboards and mice, ie the main thing I plug in to my pc. USB 2.0 came out around 1999, that covers most everything else.
Usb 3 is from 2009 or so, most of us don’t bother with them except for storage because they’re overspecced otherwise and usb 2 is cheaper.
Usb 4 will be fine in 2040 unless something weird happens, we’ll still be using usb 2.0 because the cables are cheaper and more flexible than 3.0, we’ll just call it “USBx4.2 base profile”
USB4 is actually faster than DisplayPort 2.1 and I don’t think we’ll go past 8k at 165Hz any time soon. When it comes to storage at some point you really want an SFP port currently maxing out at 400Gbit (as opposed to USB4 120Gbit, and that’s asymmetric). For reference: You need to drive the NIC with PCIe 5x16 to saturate that. Unidirectionally. Network speeds are nuts you need specialised hardware to keep up with the cables.
Why do mobile devices and computer hardware need to utilize the exact same wire? I am fine with their being two, as long as it doesn’t turn back into a half dozen types of cables again.
It’s convenience and efficiency. At the end of the day a single cable can provide that functionality needed for 99.9% of such devices. Getting everything on a single cable format reduces waste, simplifies people’s lives, and even opens up competitive spaces. There’s no need for it to be two cables.
But it’s already multiple cables. I have like 3 dozen cables, with more than a dozen being USB-C and only like 5 of them will fast charge my phone. This will get more absurd and confusing as it’s expanded over varying needs for power per device. I mean at least make some sort of easy cable label requirement.
Your word is the USB-IF’s ear. Though generally speaking there really is an enforcement problem when it comes to cables, sometimes cables don’t even meet basic USB specs much less high-speed high-power specs.
Many people have been taught regulation is bad, not much logic to it.
USB-C as a connector can easily last a decade, much longer for just power delivery.
Exactly! Most electronics are surprisingly low-powered, but USB-C can currently support 100W with a draft spec with upwards of 240W. We’ll be fine for awhile.
Yeah, USB-C is fine for even mid-grade laptops. Realistically, if your device is using more than 100W then it probably has an IEC plug (or at least, an in-line power brick with an IEC port) instead. Pretty much the only thing USB-C isn’t suitable for currently is gaming laptops, because those easily draw upwards of 200W.
They arent suitable for gaming laptops while gaming. They are fine enough to just charge during light/no usage at somewhat reduced speeds.
The USB-C EPR spec allows for 230W charging.
The Framework 16 releasing later this year will be the first laptop to use the spec with a 180w power supply
Kind of nuts to me to be putting anything 200W up anywhere near my butthole
USB-PD 3.1 standardized EPR in 2021; it hasn’t been draft for a while.
I’d be surprised if USB-C was a limitation on phone technology even by 2040. The bandwidth and power delivery capacity are way beyond what are needed now. Data transfers from phones are going to increasingly move to wireless in that time frame too, I expect.
The limitation on the viability of USB-C with phones won’t be the actual technological viability of the standard with respect to phones. Instead, the problem for USB-C for phones will be if another standard comes out and starts being used by other devices that do need higher bandwidth or power delivery capability. Monitors, storage devices, laptops (etc.) will eventually need more than USB-C can provide, even with future updates to its capacity. When those switch over to something new, that will be when phones (and other devices) will need to consider a new standard too.
Usb 1.1 came out in like 1994, I still use it for keyboards and mice, ie the main thing I plug in to my pc. USB 2.0 came out around 1999, that covers most everything else.
Usb 3 is from 2009 or so, most of us don’t bother with them except for storage because they’re overspecced otherwise and usb 2 is cheaper.
Usb 4 will be fine in 2040 unless something weird happens, we’ll still be using usb 2.0 because the cables are cheaper and more flexible than 3.0, we’ll just call it “USBx4.2 base profile”
USB4 is actually faster than DisplayPort 2.1 and I don’t think we’ll go past 8k at 165Hz any time soon. When it comes to storage at some point you really want an SFP port currently maxing out at 400Gbit (as opposed to USB4 120Gbit, and that’s asymmetric). For reference: You need to drive the NIC with PCIe 5x16 to saturate that. Unidirectionally. Network speeds are nuts you need specialised hardware to keep up with the cables.
Laptops why yes that’s what USB is for.
Why do mobile devices and computer hardware need to utilize the exact same wire? I am fine with their being two, as long as it doesn’t turn back into a half dozen types of cables again.
It’s convenience and efficiency. At the end of the day a single cable can provide that functionality needed for 99.9% of such devices. Getting everything on a single cable format reduces waste, simplifies people’s lives, and even opens up competitive spaces. There’s no need for it to be two cables.
But it’s already multiple cables. I have like 3 dozen cables, with more than a dozen being USB-C and only like 5 of them will fast charge my phone. This will get more absurd and confusing as it’s expanded over varying needs for power per device. I mean at least make some sort of easy cable label requirement.
Your word is the USB-IF’s ear. Though generally speaking there really is an enforcement problem when it comes to cables, sometimes cables don’t even meet basic USB specs much less high-speed high-power specs.
deleted by creator