• redcalcium@lemmy.institute
    link
    fedilink
    English
    arrow-up
    5
    ·
    edit-2
    9 months ago

    I went this route as well. You can get a good quality usb 3.1 portable nvme enclosure for ~$20-$30 (be careful not to accidentally buy the msata version, which is cheaper but slower). Now you have a very fast thumbdrive! The main drawback is, unlike traditional thumbdrive, I can’t use it on my android phone. Not sure if higher end phone with usb 3.1 port can actually use it.

    • circuscritic@lemmy.ca
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      9 months ago

      Your Android phone can mount an external drive enclosure over OTG, just make sure it’s compatible and formatted properly.

      • elvith@feddit.de
        link
        fedilink
        English
        arrow-up
        2
        ·
        9 months ago

        Depends on how much current the drive draws. If the m2 SSD needs more current than your regular thumb drive, your phone might not supply enough power and it stays unusable.

        Besides that, as long a the enclosure uses the standard protocol and the filesystem is supported by Android, it should work

      • redcalcium@lemmy.institute
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        9 months ago

        My old Android phone only has USB 2.0 port and can’t mount the external nvme drive (I tried with a USB 3.1 otg dongle). The same nvme drive with the otg dongle works on M2 MBA though.

    • w2tpmf@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      9 months ago

      I have an nvme enclosure with USB on one end and USBC on the other end. It reads on my Pixel phones as well as on my Samsung tablet.

      Now that you mention 3.1 compatibility with devices, I wonder if my enclosure is only 3.0 or if all my devices support 3.1. I’ve never done a speed test on it, but I guess I should.