For example, I’m sure the average joe doesn’t know just how expensive calligraphy pens can be, or how deep the rabbit hole goes on video game speedruns.

  • synclair1@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    Sorry, forgot to mention, I handwired and reused key caps. I have a lot of extra sets from liking keyboards for a while lol.

    I also used a pi pico which took some extra tlc but saved a good chunk of money (1 pico is 7 dollars and only one is necessary).

    • dustyData@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      edit-2
      1 year ago

      The DIY fallacy. “You can do this yourself for just $20. You only need some string, a plastic bottle cap. And $5k of equipment and materials that have accumulated in your garage from around a decade of on and off hobbyist hoarding. Then you too can own a solar powered battery 3D printed fusion ferromagnetic screwdriver.”

      • synclair1@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I get it, but to be fair, the keycaps I already had were only about $20 on Amazon. So if you want to be pedantic I spent $60 total. Still beats the $300 plus for the ergodox. Also, if you really want to get into it, it took me around 25 hours to fully complete since I opted to hand wire. So factor in whatever your hourly rate is times 25 hours to get the opportunity cost of the diy job. Maybe you’re right and it just makes sense to buy the darn thing. At least I had fun though.

        • dustyData@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Most people don’t even own a soldering iron to wire it all. That’s another $20 right there. Just, it’s fine to say DIY is about the fun. And by all means, anyone who wants to have fun tinkering with some tech, go ahead, it’s a blast. But it’s never about the money. It’s disingenuous to tell people, “Oh I did this $300 at retail machine for $10”. No, you didn’t, you are just doing creative accounting and failing to report previous expenses. Because if it could be done for $10, big manufacturers would be doing it for $7, because they have the advantage of economics of scale.